Maintenance schedule

2010 Jeep Wrangler maintenance schedule

Every service on the 2010 Wrangler, with its interval and an estimated cost.

JK (3rd gen, 2007–2018) · 3.8L V6 · Rev + Daniel Georgiev

Checked against the manufacturer's service schedule · Reviewed Oct 21, 2026 · 1 source

Short answer

The 2010 Jeep Wrangler oil change interval is every 6,000 mi or 6 months, whichever comes first. Change the engine oil and filter every 6,000 mi or 6 months, whichever comes first; under no circumstances should the interval exceed 6,000 mi (10 000 km) or six months. The oil change indicator message comes on when service is due but does not monitor time, so change the oil if six months have passed even if the message is not lit; change the oil more often if the vehicle is driven off-road for an extended period.

Service intervals

From the 2010 Jeep Wrangler schedule.

From the 2010 Jeep Wrangler schedule.
ServiceEveryStatus
Engine Oil & FilterSafety itemChange the engine oil and filter every 6,000 mi or 6 months, whichever comes first; under no circumstances should the interval exceed 6,000 mi (10 000 km) or six months. The oil change indicator message comes on when service is due but does not monitor time, so change the oil if six months have passed even if the message is not lit; change the oil more often if the vehicle is driven off-road for an extended period.Guide How to Change Your Oil · The engine oil system: what every part does6,000 mi / 6 mo≈ 9,500 km / 6 mo
Tire RotationRotate the tires every 6,000 mi or 6 months, whichever comes first (every oil change interval).Guide How to Rotate Your Tires at Home · How to Choose and Use a Torque Wrench6,000 mi / 6 mo≈ 9,500 km / 6 mo
Engine Air FilterReplace the engine air cleaner filter every 30,000 mi or 30 months, whichever comes first. If the vehicle is used in dusty or off-road conditions, inspect the engine air cleaner filter and replace if necessary every 12,000 mi or 12 months.Guide How to Replace Your Air Filter (Engine & Cabin)30,000 mi / 30 mo≈ 48,000 km / 30 mo
Spark PlugsReplace the spark plugs at 102,000 mi (102 months).Guide How to Change Spark Plugs · How to Choose and Use a Torque Wrench102,000 mi / 102 mo≈ 164,000 km / 102 mo
Ignition CablesReplace the ignition cables at 102,000 mi (102 months).102,000 mi / 102 mo≈ 164,000 km / 102 mo
Engine CoolantFlush and replace the engine coolant every 102,000 mi or 60 months, whichever comes first.Guide How to Flush Your Coolant System102,000 mi / 60 mo≈ 164,000 km / 60 mo
Automatic Transmission FluidChange the automatic transmission fluid and filter(s) at 120,000 mi (120 months). If the vehicle is used for police, taxi, fleet or frequent trailer towing, change the automatic transmission fluid and main sump filter at 60,000 mi (60 months).Guide How to Change Transmission Fluid120,000 mi / 120 mo≈ 193,000 km / 120 mo
Manual Transmission Fluid (inspect)At each oil change: check the manual transmission fluid level. Also check the transmission fluid level once a month and add as needed.6,000 mi / 6 mo≈ 9,500 km / 6 mo
Manual Transmission FluidNormal service: no scheduled change. Change the manual transmission fluid if the vehicle is used for any of: trailer towing, snow plowing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert operation or more than 50% of your driving is at sustained high speeds during hot weather, above 90°F (32°C); the change is due at 30,000 mi (30 months) and every 30,000 mi after (60,000, 90,000, 120,000, 150,000 mi).As needed
Transfer Case Fluid (inspect)Inspect the transfer case fluid at 30,000 mi and every 60,000 mi after (30,000, 90,000, 150,000 mi).Guide How to Change Transfer Case Fluid (4x4 and AWD)60,000 mi / 60 mo≈ 97,000 km / 60 mo
Transfer Case FluidNormal service: no scheduled change (inspect only). Change the transfer case fluid if the vehicle is used for police, taxi, fleet, off-road or frequent trailer towing; the change is due at 60,000 mi and 120,000 mi.Guide How to Change Transfer Case Fluid (4x4 and AWD)As needed
Front & Rear Differential Fluid (inspect)Inspect the front and rear axle fluid every 18,000 mi or 18 months; change it if the vehicle is used for police, taxi, fleet, off-road or frequent trailer towing.Guide How to Change Differential Fluid (Rear Axle and Front 4x4)18,000 mi / 18 mo≈ 29,000 km / 18 mo
Brake InspectionSafety itemInspect the brake linings every 12,000 mi or 12 months and replace if necessary. Also inspect the brake hoses and lines at each oil change.Guide How to Change Brake Pads: Step-by-Step Guide12,000 mi / 12 mo≈ 19,500 km / 12 mo
Suspension & Steering InspectionInspect the front suspension, tie rod ends and boot seals every 12,000 mi or 12 months and replace if necessary.Guide Suspension and Steering Inspection Guide12,000 mi / 12 mo≈ 19,500 km / 12 mo
CV Joint InspectionInspect the CV joints every 24,000 mi or 24 months, with the first inspection at 12,000 mi or 12 months.24,000 mi / 24 mo≈ 39,000 km / 24 mo
Accessory Drive BeltReplace the accessory drive belt(s) at 120,000 mi (120 months).Guide How to Replace a Serpentine Belt120,000 mi / 120 mo≈ 193,000 km / 120 mo
PCV Valve InspectionInspect the PCV valve and replace if necessary at 90,000 mi (90 months). This item is recommended by the manufacturer to the owner but not required to maintain the emissions warranty.90,000 mi / 90 mo≈ 145,000 km / 90 mo
Battery InspectionOnce a month: inspect the battery and clean and tighten the terminals as required.Guide How to Replace a Car Battery (on a Modern Car) · The car battery and charging system: what every part does1 mo

≈ converted from the other unit and rounded.

Common questions about the 2010 Jeep Wrangler

How often does a 2010 Jeep Wrangler need an oil change?

The 2010 Jeep Wrangler oil change interval is every 6,000 mi or 6 months, whichever comes first. Change the engine oil and filter every 6,000 mi or 6 months, whichever comes first; under no circumstances should the interval exceed 6,000 mi (10 000 km) or six months. The oil change indicator message comes on when service is due but does not monitor time, so change the oil if six months have passed even if the message is not lit; change the oil more often if the vehicle is driven off-road for an extended period.

What maintenance does a 2010 Jeep Wrangler need?

The services not to skip on a 2010 Jeep Wrangler: engine oil & filter every 6,000 mi / 6 mo; brake inspection every 12,000 mi / 12 mo. The table above lists every service with its interval and an estimated cost.

Sources

  1. 2010 Jeep Wrangler Owner's Manual (Chrysler Group LLC, Mopar owner publications), Maintenance SchedulesReference

Intervals vary by market, engine and driving conditions; your owner's manual is the authority for your car.