2022 Mercedes-Benz S-Class Pre-Purchase Inspection Checklist
Known Issues — 2022 Mercedes-Benz S-Class
MODERATE
MBUX Hyperscreen software bugs and freezing resolved via OTA
MODERATE
48V mild hybrid fault codes on V8 models
MODERATE
Rear-axle steering recalibration required after wheel/tire service
MODERATE
Air suspension compressor wear on higher-mileage examples
MODERATE
Night vision system calibration loss after front-end work
MODERATE
OTA update failure locking infotainment until dealer visits
What to Inspect
- Confirm MBUX Hyperscreen is on latest stable software
- Test 48V mild hybrid system operation and fault code check
- Verify rear-axle steering and calibration status
- Test night vision display and pedestrian detection (if equipped)
- Check air suspension for equal ride height all corners
- Ensure all OTA updates have been applied without error
Expected Maintenance Costs
| Service | Interval | Cost |
|---|---|---|
| Service A (oil & filter) | every 10,000 miles | $450-$650 |
| Service B (full inspection) | every 20,000 miles | $1,000-$1,600 |
| Air spring replacement (each) | as needed | $1,400-$2,400 |
| Spark plugs (V8, 16 plugs) | every 30,000 miles | $900-$1,400 |
| Brake pads and rotors (front) | every 25,000-35,000 miles | $1,100-$1,800 |
| Night vision camera calibration | as needed | $300-$600 |
Get a Personalized AI Inspection Report
The data above covers common issues. For a comprehensive, AI-generated report specific to this vehicle — including detailed checks for every system, red flags, and a full verdict — generate your free report below.
2 free reports per day · No account needed
More Mercedes-Benz Inspection Checklists
Maintenance Guides for Mercedes-Benz Owners
Want a complete buying guide? Read our Used Car Buying Inspection Checklist.