2019 Hyundai Tucson Pre-Purchase Inspection Checklist
Known Issues — 2019 Hyundai Tucson
Engine theta II (2.0L/2.4L) bearing failure risk — check for recall compliance (SC189/SC197)
Theta II engine oil consumption — can consume 1 qt per 1,000 miles
Transmission jerk on DCT models (7-speed dual-clutch) at low speeds
Panoramic sunroof water leak at drain channels
Infotainment unit sluggishness and map update failures
ABS module corrosion in rust-belt states
What to Inspect
- Verify Theta II engine recall completion (essential — check NHTSA by VIN)
- Check oil level and condition — low oil signals consumption issue
- Test DCT transmission for jerkiness in slow traffic (if equipped)
- Inspect sunroof seals and drains for water intrusion signs
- Check ABS module for corrosion on undercarriage
- Verify engine does not knock or rattle on cold start
Expected Maintenance Costs
| Service | Interval | Cost |
|---|---|---|
| Oil change (synthetic) | every 5,000 miles | $50-$85 |
| DCT fluid service | every 30,000 miles | $120-$200 |
| Air filter replacement | every 15,000-30,000 miles | $20-$40 |
| Brake pad replacement (front) | every 40,000-60,000 miles | $150-$250 |
| Spark plugs | every 60,000 miles | $80-$150 |
| Coolant flush | every 60,000 miles | $80-$130 |
Get a Personalized AI Inspection Report
The data above covers common issues. For a comprehensive, AI-generated report specific to this vehicle — including detailed checks for every system, red flags, and a full verdict — generate your free report below.
2 free reports per day · No account needed
More Hyundai Inspection Checklists
Maintenance Guides for Hyundai Owners
Want a complete buying guide? Read our Used Car Buying Inspection Checklist.